dishwasher capsules

The use of dishwasher capsules mainly includes the following steps:

1. Pre-preparation:

– Before using the dishwasher capsules, it is necessary to clean the food residue from the utensils.

– Check that the filter of the dishwasher is clean to ensure the normal operation of the dishwasher.

2. Place the capsule:

– Place the dishwasher capsules in the dishwasher’s detergent bin or pill box. This location is usually at the bottom of the dishwasher door or inside the dishwasher body.

– When placing, follow the instructions on the capsule packaging, taking care not to damage the capsule.

3. Load cutlery:

– Place cutlery in the dishwasher, pay attention to leave a certain gap between the cutlery, to avoid water erosion.

– Remove large food debris from utensils before setting.

4. Select the washing procedure:

– According to the degree of dirt and material of tableware, choose the appropriate washing procedure.

– When using dishwasher capsules, it is recommended to choose an efficient washing procedure to get the most out of the capsule.

5. Start the dishwasher:

– Close the dishwasher door and select the desired washing mode and other Settings (such as drying, enhanced sterilization, etc.).

– Press the start button and the dishwasher will start working.

6. Disposal after completion:

– After the washing process, open the dishwasher door and remove the dishes.

– Check that cutlery is clean and properly stored.

Please note that different brands and models of dishwashers may have different modes of operation and washing procedures, so it is recommended to read the dishwasher’s instruction manual carefully before use and adjust it according to the actual situation. In addition, the amount of dishwasher capsules should also be reasonably adjusted according to the number of tableware and the degree of dirt.

Leave a Reply

Your email address will not be published. Required fields are marked *